قالب‌های رزومه و انگیزه‌نامه

۱۴ قالب

• +98 912 000 0000

  sara.ahmadi@example.com

  Tehran, Iran

  linkedin.com/in/sara-ahmadi

  github.com/sara-ahmadi

  SKILLS

  MATLAB / Simulink

  Python

  C

  ROS 2

  Siemens TIA Portal

  LANGUAGES

  Persian — native

  English — IELTS 7.0

  Italian — A2

  Sara Ahmadi

  Electrical engineer — control systems

  PROFILE

  Electrical engineer, BSc from the University of Tehran (17.4/20). Thesis on model-predictive control of a six-axis robotic arm: cut positioning error by 30% against the PID baseline. Applying for the MSc in Mechatronic Engineering to work on industrial robot control.

  EDUCATION

  BSc Electrical Engineering — Control

  2019 – 2023

  University of Tehran

  GPA 17.4/20. Thesis: model-predictive control of a 6-DOF robotic arm (19/20).

  High school diploma, Mathematics and Physics

  2015 – 2019

  Farhang High School, Tehran

  Final average 19.2/20.

  EXPERIENCE

  Control systems intern

  Jul – Sep 2022

  Pars Automation Co., Tehran

  Re-tuned the PID loops on two packaging lines; changeover time fell by 15%.

  Teaching assistant, Linear Control Systems

  2022 – 2023

  University of Tehran

  Ran the weekly problem session for 60 students and wrote the MATLAB lab handouts.

  PROJECTS

  Vision-guided line-following robot

  2021

  University robotics competition

  Raspberry Pi and OpenCV; third place of 24 teams.

  Open-source PID auto-tuner (Python)

  2023

  GitHub

  1,200 downloads; adopted in two course labs.

  پرکاربرد

  استفادهپیش‌نمایش

  ستون رنگی

  ستون رنگی سمت چپ برای عکس، تماس و مهارت‌ها؛ ستون سفید برای تحصیلات و سوابق. رایج‌ترین شکل رزومهٔ امروزی.

  تا ۲ صفحه · جای عکس دارد

• Sara Ahmadi

  Electrical engineer — control systems

  +98 912 000 0000

  sara.ahmadi@example.com

  Tehran, Iran

  linkedin.com/in/sara-ahmadi

  PROFILE

  Electrical engineer, BSc from the University of Tehran (17.4/20). Thesis on model-predictive control of a six-axis robotic arm: cut positioning error by 30% against the PID baseline. Applying for the MSc in Mechatronic Engineering to work on industrial robot control.

  EXPERIENCE

  Control systems intern

  Jul – Sep 2022

  Pars Automation Co., Tehran

  Re-tuned the PID loops on two packaging lines; changeover time fell by 15%.

  Teaching assistant, Linear Control Systems

  2022 – 2023

  University of Tehran

  Ran the weekly problem session for 60 students and wrote the MATLAB lab handouts.

  PROJECTS

  Vision-guided line-following robot

  2021

  University robotics competition

  Raspberry Pi and OpenCV; third place of 24 teams.

  Open-source PID auto-tuner (Python)

  2023

  GitHub

  1,200 downloads; adopted in two course labs.

  EDUCATION

  BSc Electrical Engineering — Control

  2019 – 2023

  University of Tehran

  GPA 17.4/20. Thesis: model-predictive control of a 6-DOF robotic arm (19/20).

  High school diploma, Mathematics and Physics

  2015 – 2019

  Farhang High School, Tehran

  Final average 19.2/20.

  SKILLS

  MATLAB / SimulinkPythonCROS 2Siemens TIA Portal

  LANGUAGES

  Persian — native

  English — IELTS 7.0

  Italian — A2

  استفادهپیش‌نمایش

  نوار سربرگ

  نواری رنگی در تمام عرض بالای صفحه با نام درشت و ردیف تماس؛ بدنهٔ سفید در دو ستون.

  تا ۲ صفحه · بدون عکس

• Sara Ahmadi

  Electrical engineer — control systems

  +98 912 000 0000

  sara.ahmadi@example.com

  Tehran, Iran

  linkedin.com/in/sara-ahmadi

  PROFILE

  Electrical engineer, BSc from the University of Tehran (17.4/20). Thesis on model-predictive control of a six-axis robotic arm: cut positioning error by 30% against the PID baseline. Applying for the MSc in Mechatronic Engineering to work on industrial robot control.

  EDUCATION

  2019 – 2023

  BSc Electrical Engineering — Control

  University of Tehran

  GPA 17.4/20. Thesis: model-predictive control of a 6-DOF robotic arm (19/20).

  2015 – 2019

  High school diploma, Mathematics and Physics

  Farhang High School, Tehran

  Final average 19.2/20.

  EXPERIENCE

  Jul – Sep 2022

  Control systems intern

  Pars Automation Co., Tehran

  Re-tuned the PID loops on two packaging lines; changeover time fell by 15%.

  2022 – 2023

  Teaching assistant, Linear Control Systems

  University of Tehran

  Ran the weekly problem session for 60 students and wrote the MATLAB lab handouts.

  PROJECTS

  2021

  Vision-guided line-following robot

  University robotics competition

  Raspberry Pi and OpenCV; third place of 24 teams.

  2023

  Open-source PID auto-tuner (Python)

  GitHub

  1,200 downloads; adopted in two course labs.

  SKILLS

  MATLAB / SimulinkPythonCROS 2Siemens TIA Portal

  LANGUAGES

  Persian — native

  English — IELTS 7.0

  Italian — A2

  استفادهپیش‌نمایش

  خط زمانی

  یک خط باریک عمودی با نقطه کنار هر مدخل؛ تاریخ‌ها بیرون خط و محتوا داخل. مسیر تحصیلی و کاری را یک‌جا نشان می‌دهد.

  تا ۲ صفحه · بدون عکس

• Sara Ahmadi

  Electrical engineer — control systems

  sara.ahmadi@example.com

  +98 912 000 0000

  Tehran, Iran

  0000-0000-0000-0000

  PROFILE

  Electrical engineer, BSc from the University of Tehran (17.4/20). Thesis on model-predictive control of a six-axis robotic arm: cut positioning error by 30% against the PID baseline. Applying for the MSc in Mechatronic Engineering to work on industrial robot control.

  EDUCATION

  BSc Electrical Engineering — Control

  2019 – 2023

  University of Tehran

  GPA 17.4/20. Thesis: model-predictive control of a 6-DOF robotic arm (19/20).

  High school diploma, Mathematics and Physics

  2015 – 2019

  Farhang High School, Tehran

  Final average 19.2/20.

  EXPERIENCE

  Control systems intern

  Jul – Sep 2022

  Pars Automation Co., Tehran

  Re-tuned the PID loops on two packaging lines; changeover time fell by 15%.

  Teaching assistant, Linear Control Systems

  2022 – 2023

  University of Tehran

  Ran the weekly problem session for 60 students and wrote the MATLAB lab handouts.

  PUBLICATIONS

  •

  Ahmadi, S., Karimi, R. (2023). Model-predictive control of a low-cost 6-DOF arm. Proc. 31st Iranian Conference on Electrical Engineering.

  PROJECTS

  Vision-guided line-following robot

  2021

  University robotics competition

  Raspberry Pi and OpenCV; third place of 24 teams.

  Open-source PID auto-tuner (Python)

  2023

  GitHub

  1,200 downloads; adopted in two course labs.

  SKILLS

  MATLAB / Simulink

  Python

  C

  ROS 2

  Siemens TIA Portal

  LANGUAGES

  Persian — native

  English — IELTS 7.0

  Italian — A2

  امن‌ترین

  استفادهپیش‌نمایش

  مینیمال

  بدون هیچ رنگی. نام بسیار درشت، خطوط مویی، فضای سفید زیاد. آراسته‌ترین قالب این مجموعه و امن‌ترین برای فضای دانشگاهی.

  تا ۲ صفحه · بدون عکس · بدون رنگ

• Sara Ahmadi

  Electrical engineer — control systems

  sara.ahmadi@example.com

  +98 912 000 0000

  Tehran, Iran

  github.com/sara-ahmadi

  linkedin.com/in/sara-ahmadi

  PROFILE

  Electrical engineer, BSc from the University of Tehran (17.4/20). Thesis on model-predictive control of a six-axis robotic arm: cut positioning error by 30% against the PID baseline. Applying for the MSc in Mechatronic Engineering to work on industrial robot control.

  EXPERIENCE

  Control systems intern

  Jul – Sep 2022

  Pars Automation Co., Tehran

  Re-tuned the PID loops on two packaging lines; changeover time fell by 15%.

  Teaching assistant, Linear Control Systems

  2022 – 2023

  University of Tehran

  Ran the weekly problem session for 60 students and wrote the MATLAB lab handouts.

  PROJECTS

  Vision-guided line-following robot

  2021

  University robotics competition

  Raspberry Pi and OpenCV; third place of 24 teams.

  Open-source PID auto-tuner (Python)

  2023

  GitHub

  1,200 downloads; adopted in two course labs.

  EDUCATION

  BSc Electrical Engineering — Control

  2019 – 2023

  University of Tehran

  GPA 17.4/20. Thesis: model-predictive control of a 6-DOF robotic arm (19/20).

  High school diploma, Mathematics and Physics

  2015 – 2019

  Farhang High School, Tehran

  Final average 19.2/20.

  SKILLS

  MATLAB / Simulink

  Python

  C

  ROS 2

  Siemens TIA Portal

  TOOLS

  Git

  LaTeX

  Linux

  Altium Designer

  SolidWorks

  Docker

  LANGUAGES

  Persian — native

  English — IELTS 7.0

  Italian — A2

  استفادهپیش‌نمایش

  کارتی

  مهارت‌ها، ابزارها و زبان‌ها به‌جای فهرست، کارت‌های کوچک کادردار در یک شبکه. مدرن و مناسب رزومهٔ فنی.

  تا ۲ صفحه · بدون عکس

• Sara Ahmadi

  Electrical engineer — control systems

  +98 912 000 0000

  sara.ahmadi@example.com

  Tehran, Iran

  linkedin.com/in/sara-ahmadi

  PROFILE

  Electrical engineer, BSc from the University of Tehran (17.4/20). Thesis on model-predictive control of a six-axis robotic arm: cut positioning error by 30% against the PID baseline. Applying for the MSc in Mechatronic Engineering to work on industrial robot control.

  EDUCATION

  BSc Electrical Engineering — Control

  2019 – 2023

  University of Tehran

  GPA 17.4/20. Thesis: model-predictive control of a 6-DOF robotic arm (19/20).

  High school diploma, Mathematics and Physics

  2015 – 2019

  Farhang High School, Tehran

  Final average 19.2/20.

  EXPERIENCE

  Control systems intern

  Jul – Sep 2022

  Pars Automation Co., Tehran

  Re-tuned the PID loops on two packaging lines; changeover time fell by 15%.

  Teaching assistant, Linear Control Systems

  2022 – 2023

  University of Tehran

  Ran the weekly problem session for 60 students and wrote the MATLAB lab handouts.

  PROJECTS

  Vision-guided line-following robot

  2021

  University robotics competition

  Raspberry Pi and OpenCV; third place of 24 teams.

  Open-source PID auto-tuner (Python)

  2023

  GitHub

  1,200 downloads; adopted in two course labs.

  ACHIEVEMENTS

  •

  Ranked 412 of 150,000 in the national university entrance exam (2019).

  •

  Third place, university robotics competition (2021).

  SKILLS

  MATLAB / SimulinkPythonCROS 2Siemens TIA Portal

  LANGUAGES

  Persian — native

  English — IELTS 7.0

  Italian — A2

  استفادهپیش‌نمایش

  خط رنگی

  صفحهٔ سفید، نام به رنگ قالب و یک خط نازک رنگی زیر هر عنوان بخش. کم‌ادعا ولی آشکارا طراحی‌شده.

  تا ۲ صفحه · بدون عکس

• Sara Ahmadi

  Electrical engineer — control systems

  +98 912 000 0000

  sara.ahmadi@example.com

  Tehran, Iran

  linkedin.com/in/sara-ahmadi

  PROFILE

  Electrical engineer, BSc from the University of Tehran (17.4/20). Thesis on model-predictive control of a six-axis robotic arm: cut positioning error by 30% against the PID baseline. Applying for the MSc in Mechatronic Engineering to work on industrial robot control.

  EDUCATION

  BSc Electrical Engineering — Control

  2019 – 2023

  University of Tehran

  GPA 17.4/20. Thesis: model-predictive control of a 6-DOF robotic arm (19/20).

  High school diploma, Mathematics and Physics

  2015 – 2019

  Farhang High School, Tehran

  Final average 19.2/20.

  EXPERIENCE

  Control systems intern

  Jul – Sep 2022

  Pars Automation Co., Tehran

  Re-tuned the PID loops on two packaging lines; changeover time fell by 15%.

  Teaching assistant, Linear Control Systems

  2022 – 2023

  University of Tehran

  Ran the weekly problem session for 60 students and wrote the MATLAB lab handouts.

  PROJECTS

  Vision-guided line-following robot

  2021

  University robotics competition

  Raspberry Pi and OpenCV; third place of 24 teams.

  Open-source PID auto-tuner (Python)

  2023

  GitHub

  1,200 downloads; adopted in two course labs.

  SKILLS

  MATLAB / SimulinkPythonCROS 2Siemens TIA Portal

  LANGUAGES

  Persian — native

  English — IELTS 7.0

  Italian — A2

  یک‌صفحه‌ای

  استفادهپیش‌نمایش

  فشرده، یک‌صفحه‌ای

  دو ستون فشرده، قلم کوچک و فاصلهٔ خطوط کم — برای دانشگاه‌هایی که رزومه را یک صفحه می‌خواهند.

  یک صفحه · بدون عکس

• Sara Ahmadi

  Electrical engineer — control systems

  +98 912 000 0000

  sara.ahmadi@example.com

  Tehran, Iran

  linkedin.com/in/sara-ahmadi

  PROFILE

  Electrical engineer, BSc from the University of Tehran (17.4/20). Thesis on model-predictive control of a six-axis robotic arm: cut positioning error by 30% against the PID baseline. Applying for the MSc in Mechatronic Engineering to work on industrial robot control.

  EDUCATION

  BSc Electrical Engineering — Control

  2019 – 2023

  University of Tehran

  GPA 17.4/20. Thesis: model-predictive control of a 6-DOF robotic arm (19/20).

  High school diploma, Mathematics and Physics

  2015 – 2019

  Farhang High School, Tehran

  Final average 19.2/20.

  EXPERIENCE

  Control systems intern

  Jul – Sep 2022

  Pars Automation Co., Tehran

  Re-tuned the PID loops on two packaging lines; changeover time fell by 15%.

  Teaching assistant, Linear Control Systems

  2022 – 2023

  University of Tehran

  Ran the weekly problem session for 60 students and wrote the MATLAB lab handouts.

  PROJECTS

  Vision-guided line-following robot

  2021

  University robotics competition

  Raspberry Pi and OpenCV; third place of 24 teams.

  Open-source PID auto-tuner (Python)

  2023

  GitHub

  1,200 downloads; adopted in two course labs.

  SKILLS

  MATLAB / SimulinkPythonCROS 2Siemens TIA Portal

  LANGUAGES

  Persian — native

  English — IELTS 7.0

  Italian — A2

  امن‌ترین

  استفادهپیش‌نمایش

  فرم رسمی اتحادیهٔ اروپا

  قالب استاندارد یوروپس. عمداً ساده و بی‌طراحی است؛ اگر دانشگاهی همین فرم را خواسته باشد، همین را بفرست.

  تا ۲ صفحه · بدون عکس

• Sara Ahmadi

  sara.ahmadi@example.com

  +98 912 000 0000

  Tehran, Iran

  Statement of Purpose

  MSc in Mechatronic Engineering — Politecnico di Torino

  To the Admissions Committee,

  I want to build controllers for industrial robots that stay accurate when the world around them does not. That interest started in my third year at the University of Tehran, in a laboratory where a six-axis arm missed its target by two millimetres on every cycle and nobody could say why. Finding the cause — a tuning problem, not a hardware one — took me a month, and it decided what I wanted to do next.

  My bachelor's thesis turned that month into a project. I replaced the arm's PID controller with a model-predictive one, built the plant model from step-response data, and measured the result on the same trajectory the arm had failed on: positioning error fell by 30 percent and settling time by a fifth. The work was graded 19 out of 20 and became a short paper at the 31st Iranian Conference on Electrical Engineering. In a summer internship at Pars Automation, I retuned the loops on two packaging lines and cut their changeover time by 15 percent, which taught me how much of control engineering happens on a factory floor rather than in Simulink.

  Politecnico di Torino's programme is the one I want because of its robotics track: the Robot Control course and the laboratory work in the Department of Mechanical and Aerospace Engineering cover exactly the gap between the controllers I have built and the systems I want to build. Turin's automotive and automation industry is the second reason; the internship structure of the programme puts a student inside it.

  After the master's I intend to work as a control engineer in industrial robotics for several years and then return to research, ideally in learning-based control of manipulators. My English is at IELTS 7.0 and I have begun Italian, currently at A2, because I intend to live in Turin and not only study there.

  Sincerely,

  Sara Ahmadi

  پرکاربرد

  استفادهپیش‌نمایش

  سربرگ‌دار

  نام و اطلاعات تماس در بالای صفحه، یک خط زیرش، بعد متن. شبیه نامه‌ای که واقعاً فرستاده می‌شود.

  تا ۲ صفحه · بدون عکس

• AT A GLANCE

  MSc in Mechatronic Engineering

  Politecnico di Torino

  Intake 2027/28

  Non-EU applicant, applying from Iran

  sara.ahmadi@example.com

  +98 912 000 0000

  Sara Ahmadi

  Statement of Purpose

  MSc in Mechatronic Engineering — Politecnico di Torino

  To the Admissions Committee,

  I want to build controllers for industrial robots that stay accurate when the world around them does not. That interest started in my third year at the University of Tehran, in a laboratory where a six-axis arm missed its target by two millimetres on every cycle and nobody could say why. Finding the cause — a tuning problem, not a hardware one — took me a month, and it decided what I wanted to do next.

  My bachelor's thesis turned that month into a project. I replaced the arm's PID controller with a model-predictive one, built the plant model from step-response data, and measured the result on the same trajectory the arm had failed on: positioning error fell by 30 percent and settling time by a fifth. The work was graded 19 out of 20 and became a short paper at the 31st Iranian Conference on Electrical Engineering. In a summer internship at Pars Automation, I retuned the loops on two packaging lines and cut their changeover time by 15 percent, which taught me how much of control engineering happens on a factory floor rather than in Simulink.

  Politecnico di Torino's programme is the one I want because of its robotics track: the Robot Control course and the laboratory work in the Department of Mechanical and Aerospace Engineering cover exactly the gap between the controllers I have built and the systems I want to build. Turin's automotive and automation industry is the second reason; the internship structure of the programme puts a student inside it.

  After the master's I intend to work as a control engineer in industrial robotics for several years and then return to research, ideally in learning-based control of manipulators. My English is at IELTS 7.0 and I have begun Italian, currently at A2, because I intend to live in Turin and not only study there.

  Sincerely,

  Sara Ahmadi

  استفادهپیش‌نمایش

  با ستون «در یک نگاه»

  ستون باریک کنار متن که رشته، دانشگاه و سال ورودی را یک‌جا نشان می‌دهد؛ متن اصلی در ستون پهن.

  تا ۲ صفحه · بدون عکس

• Statement of Purpose

  MSc in Mechatronic Engineering — Politecnico di Torino

  Sara Ahmadi

  I want to build controllers for industrial robots that stay accurate when the world around them does not. That interest started in my third year at the University of Tehran, in a laboratory where a six-axis arm missed its target by two millimetres on every cycle and nobody could say why. Finding the cause — a tuning problem, not a hardware one — took me a month, and it decided what I wanted to do next.

  My bachelor's thesis turned that month into a project. I replaced the arm's PID controller with a model-predictive one, built the plant model from step-response data, and measured the result on the same trajectory the arm had failed on: positioning error fell by 30 percent and settling time by a fifth. The work was graded 19 out of 20 and became a short paper at the 31st Iranian Conference on Electrical Engineering. In a summer internship at Pars Automation, I retuned the loops on two packaging lines and cut their changeover time by 15 percent, which taught me how much of control engineering happens on a factory floor rather than in Simulink.

  Politecnico di Torino's programme is the one I want because of its robotics track: the Robot Control course and the laboratory work in the Department of Mechanical and Aerospace Engineering cover exactly the gap between the controllers I have built and the systems I want to build. Turin's automotive and automation industry is the second reason; the internship structure of the programme puts a student inside it.

  After the master's I intend to work as a control engineer in industrial robotics for several years and then return to research, ideally in learning-based control of manipulators. My English is at IELTS 7.0 and I have begun Italian, currently at A2, because I intend to live in Turin and not only study there.

  Sincerely,

  Sara Ahmadi

  1

  استفادهپیش‌نمایش

  آکادمیک، عنوان وسط

  عنوان در وسط صفحه، قلم سریف و فاصلهٔ خطوط باز. برای دکتری و رشته‌های پژوهشی.

  تا ۳ صفحه · بدون عکس

• Sara Ahmadi

  Statement of Purpose

  MSc in Mechatronic Engineering — Politecnico di Torino

  I want to build controllers for industrial robots that stay accurate when the world around them does not. That interest started in my third year at the University of Tehran, in a laboratory where a six-axis arm missed its target by two millimetres on every cycle and nobody could say why. Finding the cause — a tuning problem, not a hardware one — took me a month, and it decided what I wanted to do next.

  My bachelor's thesis turned that month into a project. I replaced the arm's PID controller with a model-predictive one, built the plant model from step-response data, and measured the result on the same trajectory the arm had failed on: positioning error fell by 30 percent and settling time by a fifth. The work was graded 19 out of 20 and became a short paper at the 31st Iranian Conference on Electrical Engineering. In a summer internship at Pars Automation, I retuned the loops on two packaging lines and cut their changeover time by 15 percent, which taught me how much of control engineering happens on a factory floor rather than in Simulink.

  Politecnico di Torino's programme is the one I want because of its robotics track: the Robot Control course and the laboratory work in the Department of Mechanical and Aerospace Engineering cover exactly the gap between the controllers I have built and the systems I want to build. Turin's automotive and automation industry is the second reason; the internship structure of the programme puts a student inside it.

  After the master's I intend to work as a control engineer in industrial robotics for several years and then return to research, ideally in learning-based control of manipulators. My English is at IELTS 7.0 and I have begun Italian, currently at A2, because I intend to live in Turin and not only study there.

  امن‌ترین

  استفادهپیش‌نمایش

  مینیمال

  بدون رنگ و بدون تزیین. فقط نام، عنوان و متن، با حاشیهٔ زیاد.

  تا ۲ صفحه · بدون عکس · بدون رنگ

• Sara Ahmadi

  sara.ahmadi@example.com

  Tehran, Iran

  Statement of Purpose

  MSc in Mechatronic Engineering — Politecnico di Torino

  To the Admissions Committee,

  I want to build controllers for industrial robots that stay accurate when the world around them does not. That interest started in my third year at the University of Tehran, in a laboratory where a six-axis arm missed its target by two millimetres on every cycle and nobody could say why. Finding the cause — a tuning problem, not a hardware one — took me a month, and it decided what I wanted to do next.

  My bachelor's thesis turned that month into a project. I replaced the arm's PID controller with a model-predictive one, built the plant model from step-response data, and measured the result on the same trajectory the arm had failed on: positioning error fell by 30 percent and settling time by a fifth. The work was graded 19 out of 20 and became a short paper at the 31st Iranian Conference on Electrical Engineering. In a summer internship at Pars Automation, I retuned the loops on two packaging lines and cut their changeover time by 15 percent, which taught me how much of control engineering happens on a factory floor rather than in Simulink.

  Politecnico di Torino's programme is the one I want because of its robotics track: the Robot Control course and the laboratory work in the Department of Mechanical and Aerospace Engineering cover exactly the gap between the controllers I have built and the systems I want to build. Turin's automotive and automation industry is the second reason; the internship structure of the programme puts a student inside it.

  After the master's I intend to work as a control engineer in industrial robotics for several years and then return to research, ideally in learning-based control of manipulators. My English is at IELTS 7.0 and I have begun Italian, currently at A2, because I intend to live in Turin and not only study there.

  Finding the cause — a tuning problem, not a hardware one — took me a month, and it decided what I wanted to do next.

  Sincerely,

  Sara Ahmadi

  استفادهپیش‌نمایش

  با جملهٔ برجسته

  یک جمله از متن خودت، بزرگ‌تر و با خط رنگی کنارش، وسط صفحه. چشم خواننده را روی مهم‌ترین جمله نگه می‌دارد.

  تا ۲ صفحه · بدون عکس

• Sara Ahmadi

  sara.ahmadi@example.com

  +98 912 000 0000

  Statement of Purpose

  MSc in Mechatronic Engineering — Politecnico di Torino

  I want to build controllers for industrial robots that stay accurate when the world around them does not. That interest started in my third year at the University of Tehran, in a laboratory where a six-axis arm missed its target by two millimetres on every cycle and nobody could say why. Finding the cause — a tuning problem, not a hardware one — took me a month, and it decided what I wanted to do next.

  My bachelor's thesis turned that month into a project. I replaced the arm's PID controller with a model-predictive one, built the plant model from step-response data, and measured the result on the same trajectory the arm had failed on: positioning error fell by 30 percent and settling time by a fifth. The work was graded 19 out of 20 and became a short paper at the 31st Iranian Conference on Electrical Engineering. In a summer internship at Pars Automation, I retuned the loops on two packaging lines and cut their changeover time by 15 percent, which taught me how much of control engineering happens on a factory floor rather than in Simulink.

  Politecnico di Torino's programme is the one I want because of its robotics track: the Robot Control course and the laboratory work in the Department of Mechanical and Aerospace Engineering cover exactly the gap between the controllers I have built and the systems I want to build. Turin's automotive and automation industry is the second reason; the internship structure of the programme puts a student inside it.

  After the master's I intend to work as a control engineer in industrial robotics for several years and then return to research, ideally in learning-based control of manipulators. My English is at IELTS 7.0 and I have begun Italian, currently at A2, because I intend to live in Turin and not only study there.

  یک‌صفحه‌ای

  استفادهپیش‌نمایش

  کوتاه، سقف ۴۰۰ کلمه

  برای فراخوان‌هایی که سقف کلمه گذاشته‌اند. شمارندهٔ کلمه در پنل کنار صفحه است و پیش از خروجی هشدار می‌دهد.

  یک صفحه · سقف ۴۰۰ کلمه · بدون عکس